|
|
|
|
|
|
Skeppsta Machine AB has sold oil
presses to every continent on earth. Production began in 1987 Asia,
Europe,Denmark Norway Finland.Germany
Spain Schweiz North America, Central America and
the Caribbean,South America, Sub-Saharan Africa Australia and Oceania, Middle East, Saudi Arabia. Iran India. North Africa, and Greater
Arabia.Vietnam. North Korean
ADVANTAGES OF THE TABY PRESS TYPES 55, 70, 90 Standard
Direct drive, no belts or chains between the drive unit and the press part.
Helical gears in the gear box, of industrial quality.
Hardened press components, even those which are not wear parts, provide
improved durability when dismantling.
There is No stainless steel in
the press screw press tube, and press head in TabyPress.
In an oil
production of vegetable seeds with screw press are different rules as other
food production such as meat and milk or juice. The oil is anti-corrosive. The
oil occurs hardly any water. . The milk contains about 87% water. In a dairy is
no wear material from pipes or silos tanks mm. In an oil press, it becomes more
hard materials from machine parts. With stainless steel, the press screw will
the chromium and nickel which are toxic to humans.
Therefore, it should be hardened steel not stainless steel in
the press screw oil press for vegetable seeds.
Not good for the environment and the health of animals and
humans with stainless steel in press parts for vegetable seeds.
Combines transport trolleys scales silo bags to store seeds and pellets
is not wise to make stainless steel.
Inside the oil press polished surface and
there is no rust.
Hardened steel is durable and hardwearing.Low
cost for wear parts. The press tube is of simple design with no threads. 
The press screw can be repaired, which means low wear costs. It is
case-hardened, not just hard chromium plated.
Exchange the presscrew is very easy look at : 
Reversible press tube, provides even wear and longer service-life.
For pressing big seeds. or very light seeds in m3. Animation video
Press screw
part 2002 low cost. you can change 180 angle
and worn again Animation Video
World Patent
See Oil press in works realtime
in Finland
5 units Type 90-2 Double Double run night and day,
months after months . Over 33 000 hours á oil press running. http://rypsipuristamo.no-ip.org/
If any dealer changes something in their own way
no guarantees
or support
from Skeppsta Maskin AB
Steel in parts
Not stainless
steel in my oil press because the risk of toxic chromium Cr. and nickel Ni. in the oil and feed cake.
No advantage of using stainless in press parts on an oil press.
Rust does not exist inside an oil press because of oil is rust preventive and
seeds contain no more than 7-9% water.
There is no advantage to using stainless steel, but great disadvantages
toxic and not as durable as hardened steel.
It is hardened
steel in
a Taby Press from Skeppsta Maskin AB
The carbon cycle C in my oilpress is good for you .
0,20%
Carbon is
a chemical element with
the chemical symbol
C in the periodic table. There is coal in almost everything you eat and drink. Coal is an important building block of all living things, and because all living things are born, grow, die and decompose,
so moving
the carbon atoms
and becomes the
new threads
all the time.
All carbon atoms in existence today
are the same as ever existed on earth. They are part of a big cycle.
SIS 2172 in presstube C
Max 0.20%
and press
parts
Si Max 0.55%
Mn
Max 1.60%
P
Max 0.045%
S
Max 0.045%
SIS 2511 in press screw C
0.13 - 0.18%
Si
0.15 - 0.40%
Mn 0.70 -
1.10%
P
Max 0.035%
S
Max 0.050%
Cr
0.60 - 1.00%
Ni 0.80 - 1.20%
Mo Max 0.10%
Toxicity of Chromium Cr. and Nickel Ni.
For oil press as wears out press parts and materials coming out of the oil and
cake. Therefore, I use SIS 2511 ,
In the stainless steel is 12 % to 16% Chromium and . 3-3.5 % . Nickel
Chrome and Nickel is carcinogen
That it must be stainless steel in dairy wine making
juice and meat production is real. But the press screw on an oil press is
something else entirely. durable material coming out in the cooking oil and
animal feed.
Vegetable oils contain very little water, while wine and milk
contains over 80% waterThese stainless steel pipes do not wears the milk
flowing in the pipes.
There is a big difference between an oil press that metal wear to the oil
and feed and dairy. or wine
industry. Chromium
and Nickel in unnatural shape as the metals are dangerous. Crom naturally in
natural foods are less hazardous.
Nickel (Ni)is a nasty toxic metal and a known carcinogen. It is one of the
metals we see most commonly in toxicity tests. It appears stuck onto DNA, stuck
on to translocator protein and is often present in blood at high levels. Nickel
is a problem because it "looks" like zinc.
Chromium toxicity can lead to many skin and respiratory problems, and
sometimes can even be life-threatening. Read on to know more about the toxic
effects of chromium in humans
Ïn many years are Oil press made without
steinless steel and it is no problem in the oil and cake C carbois good for You
You might not think
of this when
you look
fine looking
stainless tubes , but illusion is deceptive knowledge.
Nickel and Chromium is toxic to humans. Check on internet
about Nickel and Chrom http://en.wikipedia.org/wiki/Chromium_toxicity
It is important not to be accused of the risk of producing nickel and crom
allergies
In the press screw Press tube
Press house Press Head Nozzle it is no good with stainless steel.
Stainless Stell can also be rust if you have much water
Of course, kitchen knives and equipment in stainless steel kitchen when
working with water in food. meat and so on. It's different when it becomes
abrasive Crom nickel in feed for animals and people in the seed cake. To be
sure of selling a good product to consumers without the risk of allergy and
disease should not use oil presses, stainless steel chrome also nickel in oil
production.
Nobody has done tests on the cake and the oil when pressed with stainless
steel.
Future delicate test equipment and studies in animals and humans may find
damage caused by chromium and nickel abrasion material
No one knows how dangerous it is poisonous. To be safe, do not use stainless
steel in an oil press.
Only the authorities of the dairy industry makes the statement. They do not
know how an oil press works
They just know that milk contains 87% water
Press tubes are inexpensive. Therefore several press
tubes can be kept in stock for different types of seed.
Exchangeable nozzles. Simple design, no threads. Low price. Seed cakes of
the pellet type.
No threads in the press tube which could otherwise become clogged up with
dried linseed oil and leftover seeds,
making the press tube difficult to dismantle. Having no threads also
means it is easier to assemble without having
to worry about seeds getting caught in threads.
Transparent inlet pipe provides the best view. A sensor can be mounted in
the inlet pipe to the hopper.
A Watch Guard 
can mount on
the oil-press.
The bearing housing has standard bearings which means low cost ball bearings.
Both slits and hole
for the oil in press-tube less risk for stop.'
Big
slits in press-house, less risk for rotation and wears. 
Overload protection is provided by means of torque limit.
The variator is by means of a static frequency changer, which means no
mechanical wear, etc.
Soft start, the rotation speed rises to the motor on-speed gradually without
jerking.
A toothed coupling between the gears and the oil press provides a soft power
transition.
Reversing option, useful when you want to dismantle the press head, etc., and
if a foreign object becomes lodged in the unit.
A display shows amps, rotation speed, volts and Hz.
Fault location capability via the display, the four most recent faults
triggered are stored.
Overheating protection 140 oC on the press head. Low current, 24 volts, in the
cable, for safety purposes.
A heating collar with a thermostat provides good starting up without the need
to change nozzles or to heat by using an external heat source, for safety
reasons etc.
Heat is provided via the heated collar; useful for pressing very cold seed in
the winter.
The robust electrical cabinet complies with CE and EMC norms.
Screened electrical cables. The sheet steel cabinet protects the electrical
components. A sighting glass allows inspection without opening a cover.
There is room for an instruction book etc. in the electrical cabinet.
There is an earth fault contact breaker in the electrical cabinet for safety
purposes.
There are fuses in the electrical cabinet. 
The press is divided into three parts: the electrical cabinet, a pressing unit
and the motor gear unit. This facilitates servicing.
Standard components, manufactured in the West, are easy to service and can be
obtained quickly.
The oil presses are not heavy. Type 55 weighs 62 kg.
Their small size means that the press is easy to position
Skeppsta Maskin AB
Bengt Jonsson
Täby Skeppsta 336
S-705 94 ÖREBRO
SWEDEN
Tel: +46-19 22 80 05 Fax: +46-19 22 80 05
Start site
Technical
details:
Oil Press: 